#Staple gun jam how to
#Staple gun jam manual

Pull the pusher rod out so that you can know what’s wrong with it.It is the parts of a staple gun that propel the staple to come out and insert it into the surface. If the staples are not the reason for the jam, the next thing you must check is the pusher rod. Clean up the discharge end if there are any bent staples.While separating the magazine, remember that each type of stapler requires a different method of detaching the magazine.Separate the magazine from the stapler and look at the discharge end if there is anything that got stuck.It’s a safety precaution for the user himself.

Detach the power supply of the stapler if it’s an electric or pneumatic staple gun.If there is any you must remove the fasteners that are preventing the movement of the other staples. To unjam any staple gun, first of all, you must look for bent staples at the dispensation point. Damage to any of the parts can give you a jammed tacker. In the same way, these three parts are also responsible for jamming the gun. The main three parts that cause most of the malfunction of a staple gun are a hammer, staple, and spring. That bent staple will prevent other staples from coming out of the exit port. In that case, the fasteners may get bent while coming out of the dispenser. Imagine you have too many pages to staple, it’s obvious that you will try to do it early and use a bit extra force to the trigger. It depends, how the user treats the gun while firing.

#Staple gun jam how to

But if you don’t know how to unjam a staple gun, you are in the right place.Ī staple gun may jam for various reasons. That’s why it will be wise for anyone to spare some time and unjam a staple gun for uninterrupted work. Nothing can be more frustrating than a staple gun that gets jammed frequently when you are doing something serious or chasing a deadline. Push the pusher rod back and forth to make sure it’s smooth for movement. If any staples get stuck in the compartment, drag the magazine out and get rid of that fastener.

#Staple gun jam manual

You will find it in the user manual for the staple gun that which size is ideal for the gun. To fix this issue, you must make sure you used a properly sized fastener. Sometimes, the staples don’t come out and remain in the magazine that later on prevent the movement of other staples. If you insert smaller fasteners, there is the highest possibility of getting your staple gun jammed. The guide rails all the staple gun has is the measurement of what the size of the staples should be. It occurs when you use staples of inappropriate size. This is the most common problem that most handymen face after doing some heavy-duty task with the staple gun no matter if it is the best staple gun available in the market. Final Words Fixing The Jammed Staple Gun.Can lubricants help to unjam staple guns?.What’s the proper way to put staples into a magazine?.What To Do To Avoid Jamming With A Staple Gun.